Assessment of the long-term leaching characteristics of cement-slag stabilized/solidified contaminated sediment.

The use of stabilized/solidified (S/S) soils and sediments as sustainable construction materials is a global concern due to the potential risk of contaminant leaching including potentially toxic elements. The long-term leachability of four metals (Zn, Pb, Cd and As) in sediments mixed with OPC (Ordinary Portland Cement) and OPC/GGBS (Ground Granulated Blast Furnace Slag) binders were investigated through a combination of tank leaching tests and kinetic leaching models, with varying ranges of curing ages and ambient pH. The leaching data revealed that both binder compositions offer an excellent immobilization capacity for the four metals, while their releases are strongly pH-dependent and are a complex function of curing time. The partial replacement of OPC by GGBS is more effective for fixing Zn and As at pH of 1, Pb at pH of 7, Zn and Pb at pH of 10. Controlling leaching mechanisms and leachability indices were determined using nonlinear regression analysis and kinetic leaching models. The first-order diffusion model (FRDM) was the most applicable model for describing the leaching characteristics of these metals under the investigated cases, the leaching rate is controlled by surface wash-off initially and then by diffusion. The leachability indices indicate that the cement-slag S/S sediment can be regarded as an environmentally sustainable material with potential beneficial uses in construction.

Stabilization/solidification and recycling of sediment from Taihu Lake in China: Engineering behavior and environmental impact.

Investigations of stabilized/solidified sediment (S/S sediment) by simulated field-construction processes (crushing and filling) are fundamental to evaluating the potential reuse as fill materials. A series of tests were conducted on the samples prepared from S/S sediment grains (SG), which was obtained by crushing the cement treated sediment. By sampling the SG with different field-curing durations (t1: 28, 35, 56 and 98 days) and measuring them by unconfined compressive strength (UCS) tests, the effect of t1 on the UCS was investigated. By continually curing the samples prepared from the SG with 28 field-curing days in laboratory for an additional 7, 28, 35 and 70 days (t2) and subjecting them to UCS and tank leaching tests with different ambient (leachate) pH values (1, 4, 7, 10 and 14), the effect of t2 and ambient pH was evaluated. Increasing t1 and t2 was found to significantly influence the strength of SG, which highlights the importance of an appropriate curing period. The releases of the metals (As, Cr, Cu, Zn, Pb, Ni, and Hg) in the SG exhibited a strongly pH-dependence but less correlation with t2. Neutral conditions (pH = 7) offered the best immobilization capacity for Cu; As, Cr, Ni and Zn exhibited the lowest release at pH = 10; the release of Pb decreased moderately with increasing pH. The S/S sediment complied with the acceptance criteria in terms of metal release and can be regarded as an environmentally friendly fill material. The results highlight the technical feasibility of stabilized sediment recycling in aquatic environment projects.

Dredged marine sediments stabilized/solidified with cement and GGBS: Factors affecting mechanical behaviour and leachability.

Management strategies for the safe disposal of contaminated dredged marine sediment constitute a global-scale environmental issue. The stabilization/solidification method was investigated as a sustainable approach to the recycling of the sediment as a construction material. A systematic study of the factors affecting the mechanical performance and contaminant release was performed. The physico-chemical variables selected to assess the potential re-use of the sediment treated with Ordinary Portland cement (OPC) and Ground Granulated Blast Furnace Slag (GGBS) in an aquatic environment were: curing duration (7, 28, 56 and 98 days), curing temperature (5, 20 and 40 °C) and ambient (leachate) pH (1, 4, 7 and 10). Unconfined compressive strength (UCS) tests were conducted and extended-duration tank leaching tests were used to characterize the long-term leaching of Al, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Ba, Pb. The results showed that S/S methods provide excellent immobilization of metals in marine sediment at a pH range of 4 to 10. Immobilization efficiencies of >99.9% for Mn, Fe, Zn, As, Ba, Pb and >97.8% for Al, Cu and Zn are reported over 100 days. GGBS replacement is an effective way to further improve sediment properties by enhancing strength, mitigating sediment alkalization and offering a better immobilization capacity for Fe, Ni and Zn. The release of metals (Al, Mn, Cu, As, Ba and Pb) was strongly associated with a coupling effect of the physico-chemical factors, with metal-specific responses to curing temperature, curing duration and pH. Mn mobility showed a dramatic sensitivity to ambient pH while Ba was less pH-dependent. Al release is related to strength and leached out by dissolution in all situations considered. Considering that dredged marine sediments may contain multiple metal contaminants which exhibit individual responses to remediation, treatment with GGBS may be considered a potentially suitable management option.

[Fluorescent labeling of latent fingerprints with PAMAM capped ZnS QDs].

Stable PAMAM (polyamidoamine) capped ZnS (zinc sulfide) QDs (quantum dots) were prepared and characterized with UV-Vis spectrum and PL(photoluminescence) emission spectrum on the base of coordination of Zn2+ ions with PAMAM dendrimers. The results show that Zn2+ ions coordinated with N atoms of PAMAM ligand and the saturated coordinating time is about 6 h; PAMAM capped ZnS QDs emitted strong blue light under the irradiation of UV light at the wavelength of 365 nm, and the PL emission peak is at about 500 nm. Finally, the prepared PAMAM capped ZnS QDs were applied in the fluorescent labeling of latent fingerprints on tinfoils; Latent fingerprints emitting strong blue light and were successfully detected with good resolving rate.